Shop by Brand
BioSmart: In-Wall Far Infrared Heater (BIO-1000F)
Please call "718-803-3326"
The BioSmart® In-Wall Far Infrared Heating System is a revolutionary way to heat your home. With 14 new patents, it is the most efficient, effective, safe and therapeutic heating system on the market.
Perfect as primary heating system for your home, office, studio, or gym. Refer to the PDF above, to calculate how many you will need for your particular area.
All Metal –22 & 24 gauge
16” x 12 5/8” x 4” (H,W,D)
120 Volt AC — 1000 Watt / 220 Volt AC — 1000 Watt
Requires isolated 12 gauge wire to fuse panel
Chassis Safety Insulation:
Exceeds all government and independent laboratory standards for safety in an installed heating appliance (a safety standard that exceeds other manufacturer’s specifications).
Internal Ceramic Blanket:
Provides R45 insulation between the wall and the heater. The heater cabinet installed in the wall remains cool to the touch while delivering warm (160° F) infrared heat into the room.
Thermostat Power Requirement:
None - the unit contains its own low voltage power supply for thermostat operation
Any low-volt thermostat regardless of it own power requirements, battery operated or otherwise (not supplied)
Zoned Heat Capability:
Pre-wired - simple two-wire contact to any zone control panel—can also accept multiple parallel hook-ups to a single low-voltage thermostat
CTUV-US & International (UL Equivalent)
Any wall with a minimum 3 ˝ inches of depth
Therapeutic far infrared heat
Copper lined for maximum ion transfer
Two (2) 500 watt ceramic infrared emitters
Ceramic Life Expectancy:
Rated at 40,000 hours
4,800 BTU infrared heat
Three (3) high volume, low noise 90mm DC fan
There is no AC 60Hz frequency hum as with other in-wall systems
Fan Noise Level:
18 dB—practically silent
5-Years - ceramic emitters. 3-Years - Parts & Labor.
See the Owner's Manual for specific installation instructions.
Make sure to take out all foam packing from inside and around heating elements and heater.
Be sure to double check wiring instructions as the color coded wires may not necessarily match conventional color codes.
Most thermostats are battery operated and have two contacts on the back that are used for connection to the yellow and white (or blue and white on some models) wires that go to the relay inside the heater.
Any 18-22 gauge wire can be used to run the connection from the thermostat to the heater. A wall thermostat with 12 or 24 volt power supply can also be used to operate the heater.
The contacts on the back have the same attributes as the contacts on a battery operated thermostat. The heater relay wires are connected to the milli-amp (low voltage) contacts on the back of a 12 or 24 volt thermostat.
If the 12 or 24 volt thermostat does not have milli-amp contacts on the back, it cannot be used for this application. Most 12 and 24 volt thermostats are combination thermostats and have both types of contacts on the back for connecting to various actuating valves and solenoids in heating and air conditioning systems.
These 12 and 24 volt connection pins should not be used to connect the heater. The thermostat wires to the heater incorporate a milli-amp circuit with no voltage requirements which is standard on all wall thermostats whether they are battery operated, or 12 volt, or 24 volt operated.
Applying a 12 or 24 volt DC current to the PC board and the relay inside the heater will damage the heater.
Five Year Warranty
BioSmart Technologies (BT) warrants this product, to the original purchaser or gift recipient, to be free from defects in workmanship and materials under normal use and service, for a period of three years from the date of purchase. EWT further warrants the infrared heating elements, to the original purchaser or gift recipient, for a period of five years from the date of purchase.
Five Year Infrared Element Warranty: BT shall warrant the infrared elements in the heater to be free from defects in workmanship and materials under normal use and service, and shall supply at no cost to the original purchaser replacement elements as required to maintain product in good working order.
Shipping: BT shall bear the cost of return shipping and repair, or replacement if, during the first 90 days, there is a defect in workmanship or materials. Thereafter, customer shall bear the cost of return shipping and BT shall repair or replace any defective part including all labor for a period of one full year from the date of purchase.
ALL WARRANTIES IMPLIED BY LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE WARRANTY SET FORTH ABOVE.
Some jurisdictions do not allow limitations on the length of the implied warranty, so the above limitation may not apply to you.
IN NO EVENT SHALL BT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFIT, OR MEDICAL EXPENSES CAUSED BY ANY DEFECT, FAILURE, MISUSE, OR MALFUNCTION OF THE PRODUCT.
Some jurisdictions do not allow the exclusion of limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
The Company will not be responsible for the damages or losses, direct or indirect, caused by misuse, abuse, accident, negligence, conditions of transportation or storage, or failure to follow instructions. The Company will not be responsible for any statements that are made or published, written or oral, that are inconsistent with this written warranty, or which are misleading or inconsistent with the facts as published in the literature or specifications by the Company.
This warranty is invalid if the factory-applied serial number has been altered or removed from the product.
Share your knowledge of this product with other customers...
Be the first to write a review